Quick Clamp Holder Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Generic wall mounted quick clamp holder, for max 38mm and 30mm teeth
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Wall mounted quick clamp holdes in two typs.
Max 38mm quick clamp teeth - 2 slot, if combined with the mirrored version 4 slot
Max 30mm quick clamp teeth - 3 slot, if combined with the mirrored version 6 slot
They are designed in 2 pieces that fit 2 OR 3 clamps each.
You don't have to print both, or mount them like i have done in the picture.
They are not meant to cross combine nicely 38mm with mirrored 30mm for example, however it is possible
But if you do want the 4/6 slot solution, print one of each file (the normal one and mirrored)
The screw holes are 5mm in diameter.
Filament
I recommend , PETG-CF, ABS (-GF) or ASA(-CF).
Personally i've printed it in Bambulab PETG HF. It works, but i do see that a stiffer material would have been better or something that withstands weight creep a little better than PETG.
Print Settings
Orientation like the picture.
Supports are optional, i personally prefer to use it.
Layer height 0.2mm
4 Walls (Perimeters)
1.2mm top and bottom layer
Gyroid or Cubic infill I recommend min 15-20% (What I used 15%)
I also have a generic model for Bahco quick clamps here: