BIGTREETECH SKR Mini E3 v2.0/3.0 Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for the SKR Mini E3 series for mounting. Inspired by Voron, did it by myself.
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 718
- Wydruki
- 5
- Wyświetlenia
- 3022
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Simple bracket for SKR Mini series from BTT with threaded inserts. You can add the modified DIN-clip to put it on a DIN-rail, use it without the clip or just 3M VHB tape.
Use at least M3x8 BHCS ISO 7380-1 screws to mount the DIN-clip on the bracket.
Personally I used Ruthex M3x5.7 inserts, but everything shorter should be fine.
You can also use inserts with Voron specs, use the 4.7mm variant.
For mounting on a DIN-rail, you'll need my modified DIN-clip here.
Printed with ASA just fine.
If you have any suggestions, help is appreciated.
Changelog:
- 25.04.23
- Added bracket variants with 4.0mm (Ruthex) and 4.7mm (Voron) holes for the appropriate inserts, since there were problems with a too tight fit of the inserts