BIGTREETECH SKR Mini E3 v2.0/3.0 Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for the SKR Mini E3 series for mounting. Inspired by Voron, did it by myself.
- Rating
- 5 / 5
- Likes
- 65
- Downloads
- 718
- Makes
- 5
- Views
- 3,022
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Simple bracket for SKR Mini series from BTT with threaded inserts. You can add the modified DIN-clip to put it on a DIN-rail, use it without the clip or just 3M VHB tape.
Use at least M3x8 BHCS ISO 7380-1 screws to mount the DIN-clip on the bracket.
Personally I used Ruthex M3x5.7 inserts, but everything shorter should be fine.
You can also use inserts with Voron specs, use the 4.7mm variant.
For mounting on a DIN-rail, you'll need my modified DIN-clip here.
Printed with ASA just fine.
If you have any suggestions, help is appreciated.
Changelog:
- 25.04.23
- Added bracket variants with 4.0mm (Ruthex) and 4.7mm (Voron) holes for the appropriate inserts, since there were problems with a too tight fit of the inserts