Snapmaker U1 Mainboard Cooling Box 60x60x15 Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ABS cooling enclosure for Snapmaker U1 motherboard for 60x60x15 fan
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 1368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Designed to protect the motherboard and drivers when using an active chamber heater.
The enclosure provides localized cooling for the heatsink and motherboard while minimizing airflow disturbance inside the heated chamber. Exhaust airflow is diffused at the outlet and does not interfere with chamber heater operation.
Printed in ABS using standard settings and standard supports.
Included:
STL files
STEP files available upon request.
Required Parts
Optional:
KSD9700 thermal switch, 45-55°C, Normally Open / NO
Double Side Thermal Conductive Tape
Wiring
The fan is powered directly from the motherboard power connector using a small soldered splitter.
RFID extension cables were made using GH1.25 connectors.
Recommended: install the KSD9700 thermal switch inline with the 24V fan power wire and attach it to the side of the heatsink using thermal conductive tape.
This allows automatic temperature-controlled fan operation.
Installation Notes
Two optional mounting holes are provided
Fan orientation:
label side facing inward toward the heatsink
airflow directed into the enclosure
If you need the STEP files for a specific modification or adaptation, please contact me.
The published STL files were printed and installed on a real machine to verify fitment and assembly. The cooling solution reduced motherboard temperatures from approximately 90°C to 50°C while remaining nearly silent during operation.
If there are questions about installation or modifications, I’ll gladly help.