1 / 13
Zooz ZSE44 Mount for Prusa USS Drybox — zdjęcie 1
1 / 13

Zooz ZSE44 Mount for Prusa USS Drybox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount a Zooz ZSE44 sensor in a Prusa USS Drybox for Z-Wave humidity and temperature monitoring.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Add Z-Wave environmental monitoring to your Prusa USS Drybox using the ZOOZ ZSE44 Temperature/Humidity Sensor. This mount securely holds the ZSE44 and slides directly into the existing hygrometer slots inside the Prusa USS Drybox.

***** Modification to the Prusa USS Drybox required *****

Perfect for integrating your filament storage into home automation platforms such as:

  • Home Assistant

  • Hubitat

  • SmartThings

  • Other Z-Wave compatible systems

The ZSE44 slides easily into the holder while remaining accessible for battery replacement and maintenance.

Features

  • Designed specifically for the ZOOZ ZSE44 sensor

  • Fits the Prusa USS Drybox hygrometer slot location

  • No supports required

  • Tight, secure fit

  • Quick sensor installation and removal

  • Compatible with multiple filament types

  • Great for humidity monitoring of filament storage environments

Important Modification Required

The Prusa USS Drybox lid includes a small molded plastic tab intended to retain the original hygrometer. This tab must be removed or trimmed flush for the mount to fit correctly. The modification is simple and can be completed with flush cutters, side cutters, or a hobby knife. 
During testing, we found that the factory hygrometer still maintained a snug fit even after removal of the retaining tab.
Please review the included photos for the exact tab location.

Note: Modifying the Prusa USS Drybox will likely void any manufacturer warranty.

Print Settings

  • Printer: Prusa Core One

  • Nozzle Diameter: 0.4mm

  • Layer Height:

    • 0.16mm recommended

    • 0.20mm also works

  • Supports: Not required

  • Perimeters:

    • Recommended: 4

    • Minimum: 2

Tested Materials

  • PLA

  • PETG

  • ASA

Notes
Printer calibration is important.
This model uses relatively tight tolerances to achieve a secure fit for both the ZSE44 and the Drybox mounting slots.

If your printer is over-extruding or dimensional accuracy is off, fitment may be tight.

Minor sanding or slight scaling adjustments may be required depending on your printer calibration and filament characteristics.

Installation

  1. Print the mount

  2. Remove the small retaining tab from the Prusa USS Drybox lid

  3. Pair the sensor with your home automation platform

  4. Insert the ZOOZ ZSE44 sensor into the holder, making sure the hygrometer vent holes are positioned between the 2 tabs as shown in the included photos

  5. Slide the mount into the hygrometer slot location in the base of the drybox

  6. Monitor humidity and temperature in your filament drybox

Compatibility

  • ZOOZ ZSE44 Temperature/Humidity Sensor

  • Prusa USS Drybox

Disclaimer

This model is not affiliated with or endorsed by Prusa Research or ZOOZ.
Modification of the Prusa USS Drybox is required and is performed at your own risk.

Tagi