lens cone collection for open pano camera by velvia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a set of lens cones at different focal lengths
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
READ ALL OF THIS IF PRINTING ITS IMPORTANT!
This is a set of lens cones for velvias open source panoramic camera model here is the link to that model below.
I AM NOT LISTING THIS AS A REMIX BECAUSE ALL THE FILES ARE OF MY ORIGINAL CREATION THEY ARE JUST DESIGNED FOR THIS CAMERA NOT FROM ITS FILES
I will be adding more files and lens cones as well as other related models that will be on my profile page.
WARNING NEARLY ALL OF THESE FILES ARE UNTESTED IF YOU HAVE ANY ISSUES WHEN USING THEM PLEASE TELL ME THROUGH THE COMMENTS.
When printing the models as they are for use in a camera i recommend using a durable and uv resistant filaments such as PETG, PETG-CF, ABS, ASA, PA, PC ,PC-ABS. or any other filaments you choose but anything like PLA is a bad idea if you want to use a PLA derivitave like PLA+ or PLA tough do as you please and please tell me how that goes if i need to make any changes. Print setting wise i would reccommend using high wall loops (around 3-5) and to make sure your camera cone is nice and smooth use a mid to high adaptive layer height setting.
Post-proccessing the lens cones is important you will need to paint the inside of them with black paint (dont use anything to make the inside of your cones glossy) the paint is necessary because some of the optimal filaments have to shiny a surface finish.