Skateboard Wedge Riser Pad ~4° — Cruising / Carving | riser3d
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
~4.2deg wedge riser for cruising & carving. Front 6mm / Rear 2mm. Increases turn response. PETG 100% infill.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A ~4.2deg wedge riser for cruising and carving. Front 6mm / Rear 2mm geometry increases lean-to-turn ratio on your front truck for fluid, responsive carving. Fits standard 76x54mm baseplates.
FEATURES
Front 6mm / Rear 2mm wedge (~4.2deg)
- New / Old School hole pattern (6 holes)
- Through-hole bolts, 6mm diameter
- riser3d logo engraved on bottom face
- Run counter-wedge on rear for extra stability
PRINT SETTINGS
Material: PETG or ABS (NOT PLA)
- Infill: 100%
- Layer height: 0.2mm
- Supports: None needed
- Orientation: Thicker side down
SPECS
Width 76mm | Length 54mm | Front 6mm | Rear 2mm | Angle ~4.2deg
CUSTOMIZE FREE at https://riser3d.com