1 / 6
FX-4CR Combo Mount Lido/GoPro/Arca Swiss/Kickstand/Belt Clip — zdjęcie 1
1 / 6

FX-4CR Combo Mount Lido/GoPro/Arca Swiss/Kickstand/Belt Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attach your FX-4CR ham radio to Lido/Gopro/Arca mounts, or a belt/strap. Perfect for pedestrian mobile /PM operation!

Ocena
5 / 5
Polubienia
4
Pobrania
22
Wydruki
2
Wyświetlenia
165
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Design files (FreeCAD 1.0.1) included. My first time using the Assembly workbench!

This is a two-part print.

The first part "rig plate" is a backplate for the FX-4CR HF transceiver. It provides:

  1. a Lido-compatible Dual-T (2T) female interface for use with Lido 2T and compatible accessories. 

  2. a Gopro-compatible interface (the two-tab side, like a camera would have).

  3. an Arca Swiss dovetail, 32mm long. Note: if your Arca clamp is longer than 32mm, it won't fit. The rig screws are too wide to expand it further.

The second part "accessory plate" attaches to the Gopro interface using a three-tab interface.

  1. It unfolds into a kickstand. It's narrow for portability, but the doesn't topple as easily as you might think because the gopro thumbscrew helps to make a "tripod". Still... temper your expectations here.

  2. Unfold it further and you can hang the whole rig from a belt or backpack strap such that it faces you. This is the opposite of most Gopro-compatible camera mounts which face outward.

Settings:

I used PLA, but you probably want PETG for field use. I used 3 shells, low infill.
Both parts need support. The holes in the accessory plate are there to allow supports to reach the belt clip. 

Assembly:

You need three screws (M3x6 cap head) plus the Gopro thumbscrew & acorn nut.
There are three screw holes on the FX-4CR. Two are through-holes over a cavity, one is blind into a copper heatsink. Don't use too long a screw or you'll poke into it.

73 de AD8IS

Tagi