telecaster ashtray bridge pickup cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
telecaster ashtray bridge pickup cover. friction fit. PETG on core 1
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Telecaster ashtray bridge pickup cover. Couldn't find one so I made a simple one in openSCAD. One with fender "F" logo and one blank so you can add what you like.
I made this for my homemade left handed telecaster. Helps with my big hands on certain things but you have to adjust your palm muting.
This is friction fit so you can slide it on and off easily. You can also resize it pretty easily in the slicer for adjusting your fit.
I will play around with other emblems or logos in the future. Also, I am experimenting with placing it logo side up on the bed and the following split:
15.47 cut height
plug, circle, prism
1mm depth .15 tolerance
2.0 diameter .15 tolerance
Had to move the plugs so they fit within the body. My first print I placed the model with the open side down and used supports. It took over 2 hours.
Splitting and printing flat saves over an hour.
Printed in PETG on Core One with a slightly modified .20mm balanced profile. I would love to see any modifications, interesting logos, etc.
Feel free to play around with it and share your results.
Enjoy!