Creality K1/K1C riser mount for CFS/Space Pi - STRENGTHENED REMIX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slightly more strengthened version of the original.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remix of the original K1/K1C top mount for the Creality Space Pi X4 / CFS.
Original design features:
Fits on top of the K1/K1C/K1SE frame with no screws or additional mounting hardware required
Compatible in both directions on K1/K1C/K1SE printers.
No supports needed for printing
Designed strong enough to hold heavy loads — original testing showed approximately 18 kg (39.7 lbs) using PETG with 3 walls and 30% infill
Includes two 12 mm holes on top, 2 mm deep, for securing wider structures if needed
Perfect to hold a CFS or Space Pi X4
Changes in this remix:
Increased the width of the side sections to improve overall strength and rigidity
Printing notes:
PETG or stronger recommended
3 wall layers
30% infill
No supports
Depending on material and printer tolerances, the locking section may need slight scaling adjustments (the original creator noted reducing the 30 mm sides by 0.5 mm for PETG prints)
All credit for the original design goes to the original creator — this remix only modifies the side width for additional strength.
I used an aluminium sheet to hold the CFS more effectively:
Aluminium Sheet - 295 x 295mm - 18-guage