Mazda Miata (NC) Front Cowl Screw Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover (cap) that hides the screws that fasten the front cowl that covers the wiper mechanism.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this after trying a few from the internet that I did not like the fit of. I measured my 20 year old broken ones and went from there. My originals got old and cracked when trying to remove the cowl that hides the wiper mechanism.
This model is stronger and thicker than the originals and the tabs are reinforced. Should be the last ones you ever need. I would advise printing out of a UV resistant filament. Test printed in white (for contrast and what I had loaded) with a slice height of 0.15mm and 100% infill, no supports needed. Fits fine on a 2006, should fit all NC's.