1 / 1
Fossil Gen 4 Q Explorist HR (45mm) USB Pin Back Plate — zdjęcie 1

Fossil Gen 4 Q Explorist HR (45mm) USB Pin Back Plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a basic back plate for the Fossil Gen 4 Q Explorist HR (45mm) to be able to access the USB pads.

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

This is a basic back plate for the Fossil Gen 4 Q Explorist HR (45mm) to be able to access the USB pads.

You'll want four pogo pins for this job, although I suggest ordering a bulk pack. Amazon is fine, and you'll be looking for "P75-B1 Pogo Pins". I was able to find 100 pcs for $7. They'll need to be 1mm diameter.

I printed the back plate model in resin for the highest precision, but you can print this in filament as well. I made the back plate itself separate from the stand to save my resin printer time, but you can combine them and print them as a single unit, or print them apart and glue them together after to save supports.

I made the pin holes small so I could 'creep' up on a tight fit. Your mileage may vary.