1 / 1
Fossil Gen 4 Q Explorist HR (45mm) USB Pin Back Plate — image 1

Fossil Gen 4 Q Explorist HR (45mm) USB Pin Back Plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a basic back plate for the Fossil Gen 4 Q Explorist HR (45mm) to be able to access the USB pads.

Rating
0 / 5
Likes
1
Downloads
11
Makes
0
Views
46
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

This is a basic back plate for the Fossil Gen 4 Q Explorist HR (45mm) to be able to access the USB pads.

You'll want four pogo pins for this job, although I suggest ordering a bulk pack. Amazon is fine, and you'll be looking for "P75-B1 Pogo Pins". I was able to find 100 pcs for $7. They'll need to be 1mm diameter.

I printed the back plate model in resin for the highest precision, but you can print this in filament as well. I made the back plate itself separate from the stand to save my resin printer time, but you can combine them and print them as a single unit, or print them apart and glue them together after to save supports.

I made the pin holes small so I could 'creep' up on a tight fit. Your mileage may vary.