1 / 3
Prusa XL PSU Cover with Anderson Powerpoles — zdjęcie 1
1 / 3

Prusa XL PSU Cover with Anderson Powerpoles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add a 24V Anderson Powerpole plug to the back of your Prusa XL PSU Cover!

Ocena
0 / 5
Polubienia
3
Pobrania
3
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

This model lets you add a 24V Anderson Powerpole plug to the PSU Cover.

Print Settings

I used PETG 0.20mm Structural 15% grid infill

BOM

Tools:

  • Regular Crimper

  • Powerpole Crimper

  • Soldering Iron + Solder

Materials

  • 2x Powerpole Terminals + Housing

  • 1x ATC Fuse Holder (Amazon)

  • 1x Automotive Fuse (Amazon 4Amp Fuse)

    • Size the fuse up or down based on your own needs

  • 4x M3x4mm screws

    • Slightly longer or shorter is fine

  • 2x M3x10mm screws

    • Slightly longer or shorter is fine

  • Some wire

    • I used red and black 22AWG wire

  • 2x spade terminals

Assembly

Crimp the powerpole terminals, fit in housing, and press into the slot. Use the M3 screws to secure the cover. Solder the wires as shown in the picture. Use the longer M3 screws to secure the fuse holder. Crimp the spade connectors to the wire ends.

When viewed from the back, the middle and right PSU have 2 spare 24V terminals. Secure the spade terminals under the spare screw-down terminals.

Tagi