Prusa XL PSU Cover with Anderson Powerpoles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add a 24V Anderson Powerpole plug to the back of your Prusa XL PSU Cover!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 3
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
This model lets you add a 24V Anderson Powerpole plug to the PSU Cover.
Print Settings
I used PETG 0.20mm Structural 15% grid infill
BOM
Tools:
Regular Crimper
Powerpole Crimper
Soldering Iron + Solder
Materials
2x Powerpole Terminals + Housing
1x ATC Fuse Holder (Amazon)
1x Automotive Fuse (Amazon 4Amp Fuse)
Size the fuse up or down based on your own needs
4x M3x4mm screws
Slightly longer or shorter is fine
2x M3x10mm screws
Slightly longer or shorter is fine
Some wire
I used red and black 22AWG wire
2x spade terminals
Assembly
Crimp the powerpole terminals, fit in housing, and press into the slot. Use the M3 screws to secure the cover. Solder the wires as shown in the picture. Use the longer M3 screws to secure the fuse holder. Crimp the spade connectors to the wire ends.
When viewed from the back, the middle and right PSU have 2 spare 24V terminals. Secure the spade terminals under the spare screw-down terminals.