KIA AddGear vertical Glasses Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This vertical glasses case is designed for the KIA AddGear system, located to the front left of the steering wheel (PV5)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This vertical glasses case can be connected to the Kia AddGear system.
I designed it for the front left-hand side of the KIA PV5. I deliberately made it vertical so that something else (e.g. https://www.printables.com/model/1711495-kia-addgear-mount-for-apple-watch-44mm) can be installed in the second slot.
All three parts can be printed without supports.
The AddGear anchor is based on the original part from KIA (https://www.kia.com/kr/customer-service/kia-members/kia-addgear/development-ecosystem); it should be printed flat with 6–7 wall lines to ensure full stability. Naturally, I accept no responsibility whatsoever regarding durability, as this depends heavily on the material used, amongst other factors. I printed the whole thing using PETG GF.
As with the original part, 4x 6mm x 3mm magnets and a 16Ga x 1.25" finishing nail are required for the final assembly.