KIA AddGear vertical Glasses Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This vertical glasses case is designed for the KIA AddGear system, located to the front left of the steering wheel (PV5)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This vertical glasses case can be connected to the Kia AddGear system.
I designed it for the front left-hand side of the KIA PV5. I deliberately made it vertical so that something else (e.g. https://www.printables.com/model/1711495-kia-addgear-mount-for-apple-watch-44mm) can be installed in the second slot.
All three parts can be printed without supports.
The AddGear anchor is based on the original part from KIA (https://www.kia.com/kr/customer-service/kia-members/kia-addgear/development-ecosystem); it should be printed flat with 6–7 wall lines to ensure full stability. Naturally, I accept no responsibility whatsoever regarding durability, as this depends heavily on the material used, amongst other factors. I printed the whole thing using PETG GF.
As with the original part, 4x 6mm x 3mm magnets and a 16Ga x 1.25" finishing nail are required for the final assembly.