Airbus A320 Radio Managment Panel [RMP]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 1:1 replica of the A320 Radio managment panel.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 314
- Wydruki
- 1
- Wyświetlenia
- 2010
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
Update 24/09-2026: Updated resistor link and quarter watt sign.
Update 15/09-2026: Added a wiring guide and slight update to model description.
Update 28/08-2026: Updated description, added white LED switch and plastic washer, all kits sold out.
Update 06/07-2026: Updated the pictures and pdfs to remove the weird shadow bug on the models.
Update 19/06-2026: Rewritten parts of the "printing" section.
Update 18/06-2026: Added video tutorial and Mobiflight software sections.
Update 29/05-2026: Added comment about car tints to the displays for a better look.
The long awaited and much improved version 2 of my radio panel is finally done!
Please enjoy and don't hesitate to ask if you have any questions!
Video Tutorial
Here is my official video tutorial on how to order, print and assemble the entire panel.
Introduction
This is a 1:1 scale replica of the Airbus A320 radio panel with fully working displays, buttons and back-lights. The panel uses three layers of 3d printed panels and a few custom PCBs. Some sort of multi color system is required and some parts of the model are designed to be printed with a 0.2mm nozzle and smooth high temp plate.
There are 6 PCBs in total, the main board has all the lights and switches and is mounted to the bottom panel. An interfacing board attached to the main board which has the micro controller. The displays use a TM1637 display controller in a custom layout because of the limited space available, mounted in a "stack" using headers.
Disclaimer: To supply enough power to all the LEDs I use an external powered USB hub that plugs both into my computer and also to an external wall outlet.
B.O.M (Bill of Materials)
Printed:
1x bottom panel
1x middle panel
1x top panel
5x PCB spacers
1x Transparent NAV cover
1x solder guide
1x SEL light
One of each button
PCBs:
1x RMP Main board
1x MEDA2560 microcontroller Shield board
2x 7-segment interface boards
2x 7-segment controller boards
Hardware:
Qty. | Item | Link (Aliexpress) |
4 | M4x8mm screws for mounting to pedestal | |
4 | M3x8mm screws, circular hex head | |
5 | M3x12mm screws, circular hex head | |
5 | M3 nut | |
5 | M3x7x1mm hard plastic washers | |
4 | M3x3mm tall heat inserts | |
4 | M2x3mm tall heat inserts | |
4 | M2x6mm screws | |
2 | M2x4mm grub screw | |
1 | 3mm dia., 0.4mm WD, 6 laps, 60 degree, torsional spring | |
13 | 6x6x7mm tactile switches with built in LED, bright yellow or white. (You can choose) | |
1 | 6x6x7mm tactile switches with built in LED, bright white, for the freq. switch button. | |
12 | green 3mm LEDs | |
14 | warm white 3mm flat top LEDs | |
1 | yellow/orange 3mm Led | |
1 | EC11 dual rotary encode (EC11EBB24C03) | |
1 | Self-locking ON-ON toggle switch, max. 13mm wide body preferably this: MN12LL4W01. But it's expensive so I use a standard switch. | |
14 | approximately 100ohm standard ¼ Watt resistors | |
1 | approximately 200ohm standard ¼ Watt resistor | |
2 | 1K standard ¼ Watt resistor | |
2 | JST-XH 7 pin connector, (6 pin also works) | |
1 | JST-XH 3 pin connector | |
1 | JST-XH 5 pin connector | |
1 | 50K ohm trim potentiometer, Bourns 3296W | |
1 | 50K single turn trimpot, TC33X* | |
2 | CN5711 LED driver chips* | |
1 | male 2.54mm dupont 1x30 connector header | |
1 | male 2.54mm dupont 2x10 connector heade | |
1 | female 2.54mm dupont 1x30 connector header | |
1 | female 2.54mm dupont 2x10 connector header | |
4 | 100pF SMD capacitors* | |
2 | 100nF SMD capacitor* | |
2 | 100uF polarized capacitor, 6.3mm diameter, 2.5mm pitch* | |
4 | 100K ohm SMD resistors* | |
2 | TM1637 display control chip* | |
4 | yellow 3 digit common anode 7-segment displays | |
4 | female 2.54mm dupont 1x7 connector header | |
4 | male 2.54mm dupont 1x7 connector header | |
1 | female 2.54mm dupont 2x21 connector header | |
1 | female 2.54mm dupont 2x16 connector header | |
1 | female 2.54mm dupont 2x3 connector header | |
1 | MEGA2560 PRO MINI microcontroller |
Additionaly, I went to my local hardware store and bought a sheet of self-adhesive, matt car headlight tint which I cut out and applied to the displays before the final assembly.
*I recommend buying these components presoldered when ordering the PCBs. I ordered from JLCPCB and chose the correct parts from their library, the resistance can vary in range depending on stock, but aim for these values.
If ordering PCB assembly, there are two other files needed, bom and positions file, both are availible in the respecitvePCB folder.
Printing:
You'll need five different colored PLA filaments. A light blue (Panchroma PLA Matte Muted Blue, CA04024), a black and white (any brand works) and a transparent one. The more transparency the better. I used FormFutura easyFil natural color PLA. Any color for the LED solder guide part will do.
There are two print profiles, both of which you need to load and print. One is for 0.2mm nozzle and the other for a standard 0.4mm nozzle. Load the .3mf files into your slicer of choice and all the settings should be loaded. You could theoretically print all the parts with a 0.4mm nozzle, but for the best quality I highly recommend you use the correct nozzles and profiles.
The profiles have all the correct settings and I recommend you use them, but here's some of the most important settings:
All the visible components (top panel, and buttons) are .3mf files with several parts in one object that are seperate colors. In your slicer load the objects as a single object with multiple parts. In the objects tab, the parts named "top panel" are blue, "transparent" -> transparent, and "..._button" are black. Objects named "body..." or similar are white top text. You should set the filaments accordingly.
The top panel has a special modifier to turn of the fan on the last parts, where the holes for the NAV button cover stick up. Since they're quite thin and can easily break this helps increase their strength. This is shown in the video tutorial.
The transparent parts should have lower infill, approx 10%, and the all other objects have 100% to stop light from bleeding. The top panel also has ironing turned on and is oriented to be ironed from side to side for a better and smoother look.
The 0.4 nozzle objects are lower layer height for better quality and higher infill. The transparent NAV cover has special settings to increase transparency, such as slower speed, less walls and higher temperature.
The raw model files are also availible in the files section.
Assembly:
Microcontroller Shield:
Start by soldering on the MEGA2560 controller. I bought the appropriate headers to easily connect and disconnect the microcontroller from the PCB. Use the included headers for the microcontroller and solder the female headers to the PCB or directly the MC. Then solder the two outer female headers. If using two seperate headers instead of 1x30, you might need to shave off some plastic from the edge using a knife to make them fit next to each other.
Main PCB:
Start by soldering all the LEDs. Use the included LED solder guide part by inserting corresponding colored LED in a slot and puting in the guide. Solder from the back, ENSURE CORRECT LED POLARITY! Square holes/pads are negative.
Continue by soldering resistors, ensure the correct resistance (see component list), and the JST connectors, 4 in total.
Move on with the switches with built in LEDs, also in the correct polarization! I used a white LED switch for the frequency switch arrow button as to not get a yellow tint on it, but you can also use a yellow.
And finally, solder the two male headers and trim potentiometer and solder the large dual rotary encoder ensuring it sits flush on the board.
7-Segment Displays:
Start by soldering the smallest surface components and the large capacitor accordingly, if they're not already presoldered.
Next, solder the large displays and the TM1637 controller chip. Finally solder on the headers accordingly. Optionally, you can also apply some self-adhesive car headlight tint to the displays for a matter and better look.
CAUTION!!! The 7-segment PCB assembly has a wiring error that makes it display the digits in the wrong order. Instead of "123456" it's "456123". This is fixed by software preset included.
Final Assembly:
Start by using a soldering iron to insert the heat inserts into the bottom panel(see schematic). Next insert five M3 nuts into the slots in the middle panel and the provided nut for the larger ON-ON switch.
Continue by inserting and screwing the 7-segment displays using M2 screws and tightening the large ON-ON switch. Next mount the large main PCB board with five M3 screws and the plastic washers into the five nuts, through the PCB spacers, bottom panel and into the middle panel.
Now simply drop in the buttons, including the large green switch button and screw on the top panel using four screws. Now it might be a good time to insert the 7-segment controller board, circle above circle and square above square symbols.
Finally, insert the spring, NAV button cover and insert a piece of 1.75mm filament through the side to secure it. Connect the MEGA2560 controller through the contacts on the back and crimp and connect the displays to their headers and the ON-ON button to it's 3 pin header. The 5 pin header [J3] is designed to connect to my lightning panel module (see my profile). I have added a wiring diagram on how to connect all the wires and headers, please see the pictures.
The four outer M4 screws get mounted through 4 screw "caps" which are availible on my profile.
For the frequency knobs i used this great model by Mark Ayton which is secured using two M2 grub screws:
Software:
For the software I used a program called Mobiflight. It automatically communicates with the simulator and your external hardware. You first have to flash the microcontroller with the mobiflight code directly from the application. Go to extras->settings->mobiflight modules and upload the MEGA 2560 firmware to your microcontroller. Then on the same page click on the open button and open the .mfmc file and upload the config. This will bind all the buttons and LEDs to their appropriate pins.
Now just open the .mfproj project file and the three dots->controller bindings and chose your newly flashed microcontroller. Finally click the play button and you should be set. Currently I only have the config for the Fenix A320 Aircraft.
My other model (lightning panel) plugs into the 5 pin JST connector on the back of the module and the config for it is included in the Mobiflight files.
There are many tutorials and documentations availible on the internet on how to use the Mobiflight software, and I highly recommend looking at my video tutorial for this step especially.
Other Models:
Be sure to check out my other models on my profile too! My external lightning panel connects to the 5 pin header on this panel. And the screw "caps" are availible on my page.
This model was made 100% by human!