1 / 1
3rd gen Toyota 4 Runner Panhard bar bushings (TPU)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seeing how long these last, old bushings were shot and I had 160g of TPU left on a roll.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Lifted the 4 runner, old bushing was shot so I modeled this,
Seeing how long these last, old bushings were shot and I had 160g of TPU left on a roll.
Printed with 99x walls for 100
Pressed in with hammer and 6" vise
print 4x for one bar. 8x total needed.