FIFO Single Dose Espresso Under Cabinet Test Tube Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FIFO rotating test tube holder for mounting under a cabinet
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I made this to clear my counter and still let me have a month of espresso single dosed out. I roast my own coffee and use different rows for the different kinds of coffee. It has a print in place bearing so that it can spin around. An o-ring provides tension to keep tubes from falling out. The tubes can be pulled out, used, and reinserted at the top to FIFO (First In First Out) the tubes. I use different color test tuvbe lids for arabica and robusta beans.
The model prints in 2 parts so that no supports are needed.
You will need
1- o-ring uxcell Silicone O-Ring, 130mm OD, 123mm ID, 3.5mm Width, VMQ Seal Rings Gasket, Red https://www.amazon.com/dp/B07CVJHL3Q?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4
4- 3mm heatcerts
4- 3mm screws 20mm long.
These are the tubes I use. https://www.amazon.com/dp/B08X487V59?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_10