Raspberry Pi 5 case for 3.5inch Resistive Touch Display (B)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified remake of a Raspberry Pi 5 case originally designed for the Waveshare 3.52" e-Paper HAT setup.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a modified remake of a Raspberry Pi 5 case originally designed for the Waveshare 3.52" e-Paper HAT setup.
After printing the original model, I realized I was using a different display revision than expected. To make it work, I increased the height of the display area and adjusted the fit accordingly.
And surprisingly, it fits perfect with my setup.
Changes:
Added a dedicated spacer for improved display support (seperate file)
Increased display clearance to match a different Waveshare e-Paper revision
Minor structural adjustments for stability and print tolerance
Notes:
This is not a direct copy of the original model. It has been reworked for my specific hardware configuration.