Raspberry Pi 5 case for 3.5inch Resistive Touch Display (B)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modified remake of a Raspberry Pi 5 case originally designed for the Waveshare 3.52" e-Paper HAT setup.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 42
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a modified remake of a Raspberry Pi 5 case originally designed for the Waveshare 3.52" e-Paper HAT setup.
After printing the original model, I realized I was using a different display revision than expected. To make it work, I increased the height of the display area and adjusted the fit accordingly.
And surprisingly, it fits perfect with my setup.
Changes:
Added a dedicated spacer for improved display support (seperate file)
Increased display clearance to match a different Waveshare e-Paper revision
Minor structural adjustments for stability and print tolerance
Notes:
This is not a direct copy of the original model. It has been reworked for my specific hardware configuration.