1 / 1
Dishwasher Wheel and Clip (compatible w/ GE Triton XL) — zdjęcie 1

Dishwasher Wheel and Clip (compatible w/ GE Triton XL)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement lower-rack wheel and wheel clip. Reverse engineered for a GE Triton XL. Recommend PETG/ABS.

Ocena
5 / 5
Polubienia
3
Pobrania
11
Wydruki
1
Wyświetlenia
47
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Open Community License v1

This print replaces a damaged wheel/wheel clip for a GE Triton XL dishwasher's lower rack.

The model for the clip is mostly faithful to the original part, but slight changes were made to achieve the desired stiffness. I have included a faithful recreation of the wheel as well as a modified version that is easier to print.

Print Settings

Both parts were printed using Inland PETG+ (Black) with a layer height of 0.12mm. A high-temp filament such as PETG or ABS is strongly recommended. Depending on your water temperature PLA may survive, but it is likely to warp and fail rapidly.

Wheel: The wheel can be printed without supports when placed on the flat side. I would recommend 3+ walls and 15-20% infill for strength.

Clip: The clip requires support, and a raft is recommended due to the very small contact area with the bed. Enable "Support Only on Bed" or similar in slicer settings, and consider adding a support blocker on the inside of the circular tube.