1 / 1
Dishwasher Wheel and Clip (compatible w/ GE Triton XL) — image 1

Dishwasher Wheel and Clip (compatible w/ GE Triton XL)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement lower-rack wheel and wheel clip. Reverse engineered for a GE Triton XL. Recommend PETG/ABS.

Rating
5 / 5
Likes
3
Downloads
11
Makes
1
Views
47
Reviews
1

Updated at source:

Model information

Category
Kitchen
License
Open Community License v1

This print replaces a damaged wheel/wheel clip for a GE Triton XL dishwasher's lower rack.

The model for the clip is mostly faithful to the original part, but slight changes were made to achieve the desired stiffness. I have included a faithful recreation of the wheel as well as a modified version that is easier to print.

Print Settings

Both parts were printed using Inland PETG+ (Black) with a layer height of 0.12mm. A high-temp filament such as PETG or ABS is strongly recommended. Depending on your water temperature PLA may survive, but it is likely to warp and fail rapidly.

Wheel: The wheel can be printed without supports when placed on the flat side. I would recommend 3+ walls and 15-20% infill for strength.

Clip: The clip requires support, and a raft is recommended due to the very small contact area with the bed. Enable "Support Only on Bed" or similar in slicer settings, and consider adding a support blocker on the inside of the circular tube.