Spacer Bracket for AxiDraw V3/A3 Pen Plotter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer Bracket to keep the distance from the Magnetic Easel and the Plotter Base constant
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 457
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created the STL file from the OpenSCAD model. It's parametric and can easily be changed to adjust for other easels or widths to provide more stability. I have an AxiDraw V3/A3 and the bracket is designed to fit that Plotter model.
I don't have access to other AxiDraw models and was unable to test and check if the bracket would fit other models too.
I used the latest PrusaSlicer and PLA to print it on an MK3S+. There is a 15% Infill and no support, no Brim and no raft.
PLA should be fine for most people since this is not a mechanical part that has to withstand force.