5-Inch Honey Comb Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this simple coaster as an example of how I make honeycomb patterns in Fusion 360 for a YouTube Video.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 400
- Wydruki
- 0
- Wyświetlenia
- 1255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this simple coaster as an example of how I make honeycomb patterns in Fusion 360 for a YouTube video which you can view below. This coaster is 5-inches in diameter with a 0.25-inch solid border and is 0.25-inches thick. It looks great when the cells are filled with resin!
Remix Culture Approved! - To aid in remixes from the community I have added the design files in all of the relevant formats for you to download.
Design File Included: .stl .f3d, .ipt, step, .skp and obj files.
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Follow The Makers Workbench on:
Print Settings
I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.4.1 with the following amendments made.
- 6-perimeters
- 4-top layers
- 4-bottom layers
- 20% infill
- Rectilinear Infill
- Monotonic Top and Bottom Pattern
PLA Used: Polymaker PLA - https://amzn.to/3uF9Soo