IKEA METOD Plinths Joiner (Connector)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Joins/connects two inline plinth pieces for the IKEA METOD system.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 122
- Wydruki
- 4
- Wyświetlenia
- 1156
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The default plinth joiner piece for the IKEA METOD system was tiny and easily knocked off while vacuuming and eventually lost and does not cover gaps.
Designed a new piece using the joiner nubs for the original plinth end cap pieces and added a covering piece to hide badly sawn/worn off edges of the plinth pieces
Print with supports everywhere with the plinth covering piece or the largest flat side facing down as shown in the attached images.
Use bobstro's support settings for best results:
- 0.25mm Top contact Z distance.
- 75% xy separation between an object and its support.
- 3mm pattern spacing.
- 4 Top interface layers.
- 0.2mm interface pattern spacing.
Printed in PETG at 0.20 mm layer height. Feel free to test with PLA.