Steam Controller and Puck Holder for Ikea Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Steam Controller holder for the IKEA Skadis board, that also functions as a charging dock.
- Ocena
- 4,6 / 5
- Polubienia
- 33
- Pobrania
- 139
- Wydruki
- 5
- Wyświetlenia
- 671
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I finally received my Steam Controller, and I wanted to make a holder for it to mount it on my IKEA Skadis board next to my other controllers. The design of the model was heavily inspired by Agepbiz's Xbox Controller Holder. I even used his snap hook to mount my holder on the pegboard. I took extra care to make sure my holder aligns with his holder, so placing the two controllers next to each other would look nice.
Another goal I had with this model is to have a holder that also functions as a charging stand. The puck holder can be snapped on the top of the controller holder if you want it, but if you only want a holder for the controller, that part is optional and the holder works perfectly fine without it.
Assembly
To mount the holder, snap the hooks into the main holder body. After you mounted it on your Skadis board, you can use the connector piece to connect the controller holder with the puck holder. IMPORTANT! Connecting the controller and puck holder together before mounting them to the pegboard will not give you enough clearance to mount them! The puck holder also functions as a part to lock the holder on the pegboard.