EcoFlow DELTA 3 Max Plus Plug Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple cover that hides AC plugs sticking out of the lower outlet row on the EcoFlow DELTA 3 — purely cleaner look
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What This Is
Plugs sticking out of the front of the EcoFlow DELTA 3 look messy, especially when the unit sits somewhere visible — on a shelf, in a hallway, or as a permanent home backup setup. This is a simple cover that slips over the lower AC outlet area and hides the plugs from view, while keeping the upper row open for on-demand use.
That's all it does. It's purely cosmetic.
Compatibility
Designed for the EcoFlow DELTA 3 Plus Max EU version. Not tested on others (e.g. Pro) — the outlet geometry may differ.
Installation
Connect your plugs first, then slide the cover into place over the lower outlet section. To remove, just pull it off. No screws, no glue. The hooks only guide the cables — they don't hold the cover in place.
Print Settings
PLA
0.4 mm nozzle
0.2 mm layer height
2 perimeters
10% infill
For the Prusa Core One, I split the model into parts and glued them together afterwards to avoid support hell.