Desk stand for Omada EAP655-Wall access point
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set the AP on your desk, not in your wall.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This stand holds a TP-Link Omada EAP655-Wall Wi-Fi access point and sits on a desk or other flat surface. It probably works with other Omada wall access points such as the ESP725-Wall, but I haven't tested that.
I modeled this stand in Autodesk Fusion 360. I've included the CAD files in .f3d and .STEP formats so you can remix it.
Printing
Material, infill, and number of perimeters are not critical. I used PLA, 15%, and 2 perimeters (PrusaSlicer defaults). The model is optimized for 0.2mm layer height.
You will need supports for the cable pass-through hole. Support is not need for the rest of the print.
Assembly
You'll need four M3x20 socket head screws. Pop the front cover off the AP. Screw it to the stand. Reattach the cover. Plug in Ethernet cables.