Mercedes-Benz W212 E-Class Front Side Intake (W213 Style)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
W213-inspired front bumper side intake with two wings for Mercedes-Benz W212 E-Class Facelift Sport (2014–2016).
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Custom W213-inspired front bumper side intake for Mercedes-Benz W212 E-Class Facelift Sport models (2013–2016).
Printed in PETG using 0.2 mm layer height, 15% infill, and a 0.4 mm nozzle. I used manually painted supports only on the bottom sections; no supports were used for the mesh area.
A solid version is also included for anyone who prefers a non-mesh design or wants to extrude/customize their own pattern.
All 4 parts (regular + mirrored versions) technically fit within a 256x256x256 mm build volume. The print orientation I used, along with support placement, is shown in one of the photos.
The files are uploaded at the correct real-world scale and use millimeters (mm) as the unit.
ASA or ABS may be better long-term options for heat and outdoor durability, but I am currently testing the PETG version and may print/test ASA later.
The parts can be post-processed with filler primer, sanding, paint, and clear coat if desired. I have not post-processed mine yet.
Installation notes:
Mounting holes are not included. Use the OEM trim piece you remove as a guide and carefully drill the holes yourself.
Be patient during installation and avoid forcing the parts into place. The right-half dovetail section is currently somewhat weak and can break if stressed. I may upload a reinforced version with screw holes in the future when I have time.