Netrunner - Melies U Dial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dial to use instead of the cards for Méliès U from the game Netrunner
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Made this dial to select the central server for the ability of Méliès U from the game Netrunner instad of using the cards.
The dial is made of 3 different parts. Assembly is pretty intuitive, mount the Bottom2 part on top of Bottom 1 and then close it off with the Top part. BEWARE that there is a specific orientation in which the Bottom1 and Top part join, there is a bump and a groove in each respective part that fit together when putting them together.
Files are for multicolour printing. If using the STL files separate into parts and chose the different colours for each part.
If using the g-code it is made for a Prusa MK4S with MMU3, 0.4mm nozzle, 0.2 layer height. The colours set for the MMU3 are 1.Black 2.White (not used) 3.Green 4.Red 5.Blue.
I highly recommend printing it on a textured print sheet.