Netrunner - Melies U Dial
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.24 – €0.30 net (excluding VAT)
For file: Multicolor_Dial_Bottom1_0.4n_0.2mm_PLA,PLA_MK4SMMU3_17m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.27 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 17.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A dial to use instead of the cards for Méliès U from the game Netrunner
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Made this dial to select the central server for the ability of Méliès U from the game Netrunner instad of using the cards.
The dial is made of 3 different parts. Assembly is pretty intuitive, mount the Bottom2 part on top of Bottom 1 and then close it off with the Top part. BEWARE that there is a specific orientation in which the Bottom1 and Top part join, there is a bump and a groove in each respective part that fit together when putting them together.
Files are for multicolour printing. If using the STL files separate into parts and chose the different colours for each part.
If using the g-code it is made for a Prusa MK4S with MMU3, 0.4mm nozzle, 0.2 layer height. The colours set for the MMU3 are 1.Black 2.White (not used) 3.Green 4.Red 5.Blue.
I highly recommend printing it on a textured print sheet.