Death Star Wall Panel Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a small Death Star wall panel lamp for your desk. Controlled by the Force (or gestures)!
- Ocena
- 5 / 5
- Polubienia
- 112
- Pobrania
- 225
- Wydruki
- 1
- Wyświetlenia
- 1768
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a small decoration lamp for your desk. It's side panels are supposed to like the Death Star's wall panels.
Inside are 80 Neopixels (100 LEDs per meter), an Arduino Nano Every and Adafruit's VL53L0X board.
You can change the brightness, colors and modes by using the Force. Alternatively you can use gestures - for that purpose I have included Adafruit's VL53L0X board in the top of the lamp.
You will have to print:
1x Base.stl
1x Top.stl
4x Panel.stl
4x Sidebar.stl
4x Diffusor.stl (print in white)
I tried to keep the lamp quite small, so there is not much space for the necessary cables to connect the neopixels. To make soldering easier, I have included the SolderHelper.stl. Stick it on the sticky side of some blue painters tape and use it to place the neopixel strips.
You will need:
16x strips consisting of 4 Neopixels
8x strips consisting of 2 Neopixels
If you like the model, I might write a guide on how to wire everything and even upload my firmware. Just let me know :)
Happy printing!