Plinkodrop - Tabletop Marble Run
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A support-free tabletop marble run. Drop a 12mm marble through pins and ramps down into a clean collection slot.
- Ocena
- 3,5 / 5
- Polubienia
- 58
- Pobrania
- 130
- Wydruki
- 3
- Wyświetlenia
- 820
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Plinkodrop - Tabletop Marble Run
A simple, mechanical tabletop plinko game designed for your desk. Drop the marble at the top and watch it bounce through a grid of triangular pins, funnel through the side ramps, split around a center diamond divider, and land in the collection slot at the bottom.
The entire project prints completely flat on the bed and requires zero support material.
Files Included
plinkodrop-board.stl (The main game board)
plinkodrop-base.stl (The angled stand)
marble-12mm-diam (You can use your own marble. Make sure it is 12mm or below in diameter)
Print Settings
Supports: None (Optimized and oriented to print support-free)
Infill: 15% Gyroid (Standard infill works great for the board)
Design & Assembly Features
Two-Piece Design: The main board sits directly into the separate base block. The base is angled backward, holding the board at the perfect slope for the marble to roll reliably without tipping the toy over.
Base Cavity: The base stand has an internal cavity. You can pack it with clay, putty, or Play-Doh while printing to give the base a more solid feel.
Marble Assembly Tutorial
No glue required! The 12mm marble is split into two halves so it prints flat on the bed with a perfectly clean surface finish.
Insert the Core: Push the internal core pin into the pocket of one semi-sphere half.
Snap Together: Align the second half onto the exposed side of the pin and push them firmly together until they snap flush.
Tip: If the friction fit feels extra tight on your machine, a quick squeeze with a pair of pliers will help slide them perfectly into place!
Refer to: https://www.printables.com/model/1729695-no-support-marbles
More Marble Runs
Check out my marble runs:
© 2026 Facet Printworks. All rights reserved. This model is published under the Creative Commons - Attribution - Non-Commercial license. You are welcome to download, print, share, and remix this model for personal use, but commercial distribution or selling of the physical prints is strictly prohibited. Non-commercial use only.
