1 / 1
Shelf that goes on top of a brother HL-2100 or HL-2200 series printer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No idea what else to name this. It's a shelf. That you put on top of your printer.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (21)Powiązane
Requires:
- Four 3.5 mm x 30 mm screws
- A board or tablet of sufficient size (see below)
- Four pieces of 10 mm x 10 mm aluminium extrusion of equal length, roughly 10 cm are good.
Your tablet needs at least a flat surface that is 370mm wide, the depth can range from roughly 15 to 30 cm. The feet include holes to run a string all around the printer to prevent the shelf from sliding off said printer.