1 / 3
5 Round limiter for Magpul PMAG 10 LR/SR GEN M3 — zdjęcie 1
1 / 3

5 Round limiter for Magpul PMAG 10 LR/SR GEN M3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 5 round limiter for the famous Magpul PMAG LR/SR magazine. Just swap the original and you are good to go!

Ocena
0 / 5
Polubienia
12
Pobrania
83
Wydruki
0
Wyświetlenia
292
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
With this 5-round limiter for the Magpul PMAG 10 LR/SR Gen M3 you can with ease limit the capacity.


What you get:

- A drop in replacement.
- Compared to other variants, this one is fixed in place.
- If the magazine gets wet, channels in the limiter will help the water towards the back of the magazine and exit though the original floorplate.
- Print it in colors of your choosing, as i did in Prusament Orange to easily identify the modified magazines.

Recommendations when printing and assembly
(The example Gcode includes all of the recommendations):
- Split the limiter in half, from top to bottom, to make it more structural and skip the need for supports.
- When splitting the model it, add (In Prusaslicer) holes and pegs to index the two halves when gluing them together.

What you need:
- Cyanoacrylate (Super/Instans glue) to glue the halves together.
- 2.5mm Drill to clear out the holes for the pegs (Depending on the tolerance of your 3D-printer).

Note that this limiter is made for the GEN 3 LR/SR PMAG (308W).

If you like the design, I would really appreciate if you comment and post a make! :) 

Happy printing! :)

Tagi