1 / 3
Creality K1 / K1C CFS Poop Chute Upgrade — zdjęcie 1
1 / 3

Creality K1 / K1C CFS Poop Chute Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Creality K1 / K1c CFS Poop Chute Upgrade (K2 SE Inspired - Screwless / Plug & Play)

Ocena
5 / 5
Polubienia
30
Pobrania
89
Wydruki
0
Wyświetlenia
871
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

🛠 Creality K1 / K1 Max CFS Poop Chute Upgrade (K2 SE Inspired - Screwless / Plug & Play)

Did your stock CFS kit poop chute mount snap or strip its threads at the Z-axis bearing? You are not alone. The original design mounts directly to the Z-axis screw bracket, leading to constant mechanical stress, fatigue, and eventual failure. 

Inspired by the new Creality K2 SE motion system, this model is a complete redesign that completely eliminates screws, bolts, and stress on your motion axes. By utilizing the printer's native geometry, this upgraded chute provides a flawless, rigid, and 100% plug-and-play solution.

✨ Key Features

  • Zero Screws Needed: Slips directly into the rear chassis.

  • Axial De-coupling: Separates the chute from the Z-axis completely, ensuring zero wobble or transmission of stress to your lead screws.

  • Improved Clearance: The modified geometry gives the chute mechanism more physical room to smoothly open and retract during color changes, eliminating binding.

🔧 Installation Steps

  1. Prep the Rear Panel: Remove the stock plastic vertical cable cover on the inside back wall of the printer

    . This will expose the two horizontal factory slots/tabs built into the chassis.

  2. Mount the Chute: Take your printed upgrade and slide it directly onto those two factory slots. It aligns perfectly with the toolhead path out of the box.

  3. Re-calibrate Purge Coordinates: Because the position shifts slightly away from the Z-screw to a fixed chassis position, you must update your coordinates:

    • On your Creality screen, go to Settings ➡ Expert Mode ➡ Purge Coordinate Settings.

    • Manually align your toolhead to the new chute opening and save the new X/Y/Z coordinates. Done!

🖨 Recommended Print Settings

⚠ Material Requirement: ABS or ASA only. Do not print this in PLA. The internal chamber temperatures of the K1 combined with hot filament purges will deform PLA within days.

  • Orientation & Supports: Print it vertically as oriented in your slicer.

    The design is largely support-free, but adding a single Tree/Organic Support under the main overhang is highly recommended to achieve maximum precision on the mounting tabs.

  • Print Time: ~35 minutes (optimized for high-speed coreXY profiles).

  • Layer Height: 0.2 mm

  • Wall Loops: 4 walls (mandatory for structural strength around the locking clips).

  • Infill: 15% (Gyroid or Grid).

📸 Visual Reference Guide (For Upload Gallery)

  • Cable cover removed, exposing the factory chassis slots.

  •  Clear view of the mounting slots before sliding the chute in.

  • The problem – shattered stock plastic mounts caused by Z-axis fatigue.

  • Side profiles showing toolhead alignment and tray clearance. Finished installation with the CFS purge mechanism sitting perfectly flush.

 

Ideal slicing orientation and minimalist tree support placement.

  • COMIING SOON COMPATIBLE WITH K1 MAX 

Tagi