Creality K1 / K1C CFS Poop Chute Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Creality K1 / K1c CFS Poop Chute Upgrade (K2 SE Inspired - Screwless / Plug & Play)
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 89
- Makes
- 0
- Views
- 871
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial

🛠 Creality K1 / K1 Max CFS Poop Chute Upgrade (K2 SE Inspired - Screwless / Plug & Play)

Did your stock CFS kit poop chute mount snap or strip its threads at the Z-axis bearing? You are not alone. The original design mounts directly to the Z-axis screw bracket, leading to constant mechanical stress, fatigue, and eventual failure.
Inspired by the new Creality K2 SE motion system, this model is a complete redesign that completely eliminates screws, bolts, and stress on your motion axes. By utilizing the printer's native geometry, this upgraded chute provides a flawless, rigid, and 100% plug-and-play solution.
✨ Key Features
Zero Screws Needed: Slips directly into the rear chassis.
Axial De-coupling: Separates the chute from the Z-axis completely, ensuring zero wobble or transmission of stress to your lead screws.
Improved Clearance: The modified geometry gives the chute mechanism more physical room to smoothly open and retract during color changes, eliminating binding.
🔧 Installation Steps
Prep the Rear Panel: Remove the stock plastic vertical cable cover on the inside back wall of the printer
. This will expose the two horizontal factory slots/tabs built into the chassis.

Mount the Chute: Take your printed upgrade and slide it directly onto those two factory slots. It aligns perfectly with the toolhead path out of the box.


Re-calibrate Purge Coordinates: Because the position shifts slightly away from the Z-screw to a fixed chassis position, you must update your coordinates:
On your Creality screen, go to Settings ➡ Expert Mode ➡ Purge Coordinate Settings.
Manually align your toolhead to the new chute opening and save the new X/Y/Z coordinates. Done!
🖨 Recommended Print Settings
⚠ Material Requirement: ABS or ASA only. Do not print this in PLA. The internal chamber temperatures of the K1 combined with hot filament purges will deform PLA within days.

Orientation & Supports: Print it vertically as oriented in your slicer.
The design is largely support-free, but adding a single Tree/Organic Support under the main overhang is highly recommended to achieve maximum precision on the mounting tabs.
Print Time: ~35 minutes (optimized for high-speed coreXY profiles).
Layer Height: 0.2 mm
Wall Loops: 4 walls (mandatory for structural strength around the locking clips).
Infill: 15% (Gyroid or Grid).
📸 Visual Reference Guide (For Upload Gallery)
Cable cover removed, exposing the factory chassis slots.

Clear view of the mounting slots before sliding the chute in.

The problem – shattered stock plastic mounts caused by Z-axis fatigue.

Side profiles showing toolhead alignment and tray clearance. Finished installation with the CFS purge mechanism sitting perfectly flush.




Ideal slicing orientation and minimalist tree support placement.
COMIING SOON COMPATIBLE WITH K1 MAX