X-Shot Thrasher Extended Battery Frontend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It allows usage of a bigger battery (such as tattu 650mah 3S), and supports quick access to the barrel
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 683
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updates
2026-06-10 | Add a larger version of battery door (as shown in the 3rd pic) |
Key Features
Expanded Battery Bay: Fits larger batteries, specifically optimized for the Tattu 650mAh 3S LiPo (16mm x 29mm x 56mm) and similarly sized packs.
Quick-Access Barrel: Allows you to effortlessly clear dart jams or swap barrels on the fly. Fully compatible with the BCAR barrel from my Thrasher Tactical Upgrade Kit (WIP, coming soon).
Zero Extra Hardware Required: Purely a drop-in mod. Reuses the stock screws and nuts directly from the original blaster.
Assembly Instructions
Disassemble the front shell of your X-Shot Thrasher.
Recover the stock mounting screws and nuts from the original front piece.
Load the m3 hex nut to the nut retainer piece.
Slide the retainer piece into the little pocket at the very front of the stock under-barrel Picatinny rail.
Reassemble the blaster.
Secure the new front piece to the blaster body from the front, and lock it using the original screws from both sides.
Remove the thumb screw from the stock battery door and use it with the new battery door.
Important Notes:
To install the barrel from muzzle, please pay attention to the muzzle, the barrel should NOT be flush with the muzzle, it should be a little bit recessed below the lip of muzzle. (As shown in second pic).
If installed incorrectly, the dart guide may grind with the flywheel and be damaged, or even worse, burnt your motor, so be cautious with that.