Snapmaker U1 LED Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This frame covers the two sides and the front of the U1 and fits in there nicely with the Biqu Popcap. Added dovetails.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 967
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This frame covers the two sides and the front of the U1 and fits in there nicely with the Biqu Popcap. I used these LED from Amazon (https://www.amazon.com/dp/B0B1J57XS9?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) and this was printed with ASA due to the internal heat. The LED can be connected to the USB but I added the Panda Pwr from Biqu. These have snaps to join but CA glue might be needed.
Added STLs. I see the back (U) side didn't line up. I made that bigger and the connector for that area is a tad longer and hopefully will work. The two side plugs (connectors) are a tad smaller so they should also fit. The plugs can be modified to make a tighter fit and I believe everything lines up. I added the STL for a frame with 7x7x22 cutout and 6.7x6.7x20 side plugs. Added dovetails.