Snapmaker U1 LED Frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This frame covers the two sides and the front of the U1 and fits in there nicely with the Biqu Popcap. Added dovetails.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 54
- Makes
- 1
- Views
- 967
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This frame covers the two sides and the front of the U1 and fits in there nicely with the Biqu Popcap. I used these LED from Amazon (https://www.amazon.com/dp/B0B1J57XS9?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) and this was printed with ASA due to the internal heat. The LED can be connected to the USB but I added the Panda Pwr from Biqu. These have snaps to join but CA glue might be needed.
Added STLs. I see the back (U) side didn't line up. I made that bigger and the connector for that area is a tad longer and hopefully will work. The two side plugs (connectors) are a tad smaller so they should also fit. The plugs can be modified to make a tighter fit and I believe everything lines up. I added the STL for a frame with 7x7x22 cutout and 6.7x6.7x20 side plugs. Added dovetails.