astro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printed leg for a end table or night stand
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 405
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Public Domain
I've been playing with the idea of making a piece of furniture that uses ceramics in it for a long time now, and this table idea came from that attempt. I mainly used 3d printing as a “quick” way to do mock-ups. I ended up printing the master mold from which the slip-cast production molds were made, the glazing dip tank, and also the transition parts between different materials. After about three and a half years, I ran out of energy and money. Attached are photos of the processes I used and some of the other leg shapes. If there is an interest, I will rework and share more of the other designs.
Print settings for photographed model using PrusaSlicer-2.3.1 based on Slic3r:
0.30mm DRAFT Infill: 20% Generic PETG
(3) - astro_leg_section_1
(3) - astro_leg_section_2
(3) - astro_leg_section_3
(3) - astro_leg_section_4
0.30mm DRAFT(modified) Infill: 100% Generic PETG
(3) - threaded_rod_to_table_top_connector
(3) - dished_washer
(3) - glide
Hardware list:
(3) 1/4-20×21.5” threaded rod
(6) 1/4-20 hex nuts
(3) 1/4” washers
(9) 1-1/4” pocket hole screws
Top 18" diameter