IKEA TISKEN towel rail captive hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Captive hooks for IKEA TISKEN towel rail in two sizes
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Captive hooks for the IKEA TISKEN suction-cup towel rail. The TISKEN has a telescoping design with two tube diameters, so two hook variants are included:
Small: fits the inner tube (10 mm bore)
Large: fits the outer tube (15 mm bore)
Put the hooks on the rail before assembling it, because the hooks can only be removed if you also remove the end pieces that connect the rails to the suction cups.
The two designs are included in a single FreeCAD model with ConfigurationTable parameter switching.
Print the models laying on their side (as oritented in the files), and use at least 6 walls to ensure that the hook part is solid plastic. The included 3mf files contains one hook for the inner tube and three hooks for the outer tube, which should fit most configurations of the rail.