BMW Jackpad Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USE AT OWN RISK. Lifting vehicles is dangerous. Adapts BMW jack point to Harbor Freight 3 ton jack stands.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This model adapts the plastic jack point found on most modern BMWs to the profile of a Harbor Freight 3-ton jack stand. This prevents jack stands from digging into the plastic jacking points and damaging/deforming them in use.
There are two versions of the 3-ton stands in circulation. This model is compatible with units where the width of the contact patch (flat-to-flat across the black cast iron upright) measures approximately 1.2 inches (30mm). If your 3 ton stands do not match this measurement, the curved area of the model will not match the stands and you should not use this adapter.
As this is a weight-bearing part, I would recommend using 4-5 walls with generous infill to ensure structural integrity. This model will require some support.
Always use your brain when lifting any vehicle for any reason. Any work is at your own risk.