1 / 9
Ally Folding Canoe Spare Part C-Clips Model 303/ Ally Faltkanadier Ersatzteil C-Clips Modell 303 — zdjęcie 1
1 / 9

Ally Folding Canoe Spare Part C-Clips Model 303/ Ally Faltkanadier Ersatzteil C-Clips Modell 303

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,72 € – 0,88 € netto (bez VAT)

Dla pliku: Stangenhalter_Faltboot_1xv01_PETGblack#1_0.2mm_PETG_MK3SMMU2S_52m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,80 € netto (środek widełek).

Masa podana przez autora
9 g
Czas druku podany przez autora
52,2 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Spare part C-Clips Model 303 for Ally folding canoe - 90 degree clips for 16mm tubes.

Ocena
0 / 5
Polubienia
0
Pobrania
17
Wydruki
0
Wyświetlenia
66
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Motivation


[ clip system 16mm aluminium tubes ]
In the Ally folding canoes, 16mm aluminium tubes are held in place by clips.

These clips somehow seem to be difficult to buy at the moment, so I decided to design a 3D-printable model for it.

I also designed two variants with 3.5mm holes in them for tube fixation with 3mm screws or blind rivets.
As the actually drilled holes in the tube material seems to have quite large tolerances, maybe the option to drill the needed holes in the full material is the more practical one.

Stangenhalter_Faltboot_v01.stl:

Stangenhalter_Faltboot_v10_1.stl:

Stangenhalter_Faltboot_v20.stl

Print

The material recommended is PETG, as during usage the clip has to withstand strong forces.
The design requires printing with supports.
I chose organic supports which could be removed surprisingly easy and resulted in a quite nice surface quality.

Printed with SUNLU PETG (Black).

  [ C-Clip Model 303 ]
  1x Stangenhalter_Faltboot_v01.stl
     (support:                  organic support required)
     (brim:                       not required for satin)
     (print orientation:   side face of clip down)
     (colour:                    Black or as you like ;-)


Stay afloat & Enjoy!!!

Tagi