StrongArm - Guitar Mounted Effect Backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your guitar pedals on the guitar à la Dan Armstrong
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 984
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the Dan Armstrong pedals which are plugged directly into the guitar output jack and dismayed at the fact the Strat has an angled output which doesn't allow that I designed this backplate.
Fully parametrised in Fusion 360 so you should be able to make it work for any guitar and any pedal size. If you have a flat jack plate enter 0.1deg in the angle box.
There's also a pre-prepared STL file for the plate I'm using, this will fit a Hammond 1590B enclosure and a regular Strat output jack.
While you can (in theory) retrofit this onto any pedal I'd recommend designing one for this purpose with an internal battery and a better placed output jack.