1 / 8
Frame for Kamvas 16 tablet for desk monitor arm with VESA mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple frame for mounting a tablet
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I had a spare desk monitor arm, and I needed a stand for my tablet. Sadly, it doesn't have a VESA mount, so I made a simple and sturdy frame for it myself. I printed it in PETG with support enabled. It took about 200g of filament.
Final assembly requires at least four M5 bolts with hex heads and nuts to fasten. Though I used eight of those just in case. Since the holes are a bit tight, it's a good idea to heat up bolts (be aware to not burn yourself!). I also put a bit of foam on the bottom frame loops, so the tablet wouldn't slide.