1 / 8
Frame for Kamvas 16 tablet for desk monitor arm with VESA mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple frame for mounting a tablet
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I had a spare desk monitor arm, and I needed a stand for my tablet. Sadly, it doesn't have a VESA mount, so I made a simple and sturdy frame for it myself. I printed it in PETG with support enabled. It took about 200g of filament.
Final assembly requires at least four M5 bolts with hex heads and nuts to fasten. Though I used eight of those just in case. Since the holes are a bit tight, it's a good idea to heat up bolts (be aware to not burn yourself!). I also put a bit of foam on the bottom frame loops, so the tablet wouldn't slide.