1 / 11
Anet AM8 BLV Gantry Adapter Hero Me Gen 7 Release 4 (HMG7.4) — zdjęcie 1
1 / 11

Anet AM8 BLV Gantry Adapter Hero Me Gen 7 Release 4 (HMG7.4)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gantry Adapter for the Hero Me Gen 7 Release v4

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Parts Print List:

  • 1 × HMG7.4 Anet AM8 BLV MGN X Carriage Adapter.stl

  • 2 × HMG7.4 Anet AM8 BLV MGN X Carriage Plates.stl

  • 1 × HMG7.4 Anet AM8 BLV MGN X Carriage Brace.stl

For recommended printing orientation see photos.
Everything was designed for printing without supports.
Brim/skirt/raft might be necessary or recommended for 'HMG7.4 Anet AM8 BLV MGN X Carriage Brace.stl', I didn't needed it but use your own knowledge about your own printer.
Print settings as recommended by MediaMan3D for the Hero Me Gen7 Platform.


BOM:

  • 6 × M3 × 12 mm button head socket cap screws or Phillips pan head machine screws

  • 4 × M3 × 8 mm button head socket cap screws or Phillips pan head machine screws

  • 10 × M3 hex nuts


Instructions (See exploded view and my use case for example):

  1. Insert 6 hex nuts into the X Carriage Adapter.

  2. Take one of the X Carriage Plates and bolt it to the X Carriage Adapter using 3 M3 × 12 mm screws.

  3. Use a small drop of super glue to hold 4 hex nuts in place inside the hex recesses of the X Carriage Brace.

  4. Use 2 M3 × 8 mm screws and 2 hex nuts to fasten the X Carriage Brace to the X Carriage Adapter.

  5. Mount the partially assembled X Carriage onto the rest of the Hero Me Gen 7 assembly. The extruder must be assembled later.

  6. Mount the assembly onto the MGN12 carriage block by inserting it from the side.

  7. Mount the second X Carriage Plate from the back using 3 M3 × 12 mm screws and 2 M3 × 8 mm screws.

Tagi